This project was quite unusual as the client needed to lift the original pine parquet block, create a new low tension sub floor and then refit the old floor as detailed by the architect. Hamish Anderson of Campbell Contracts, with the help of Lecol, decided to use a unique system that met with everyone’s expectations and specification.
After the block was removed and the sub floor was cleaned, a layer of WAKOL PU280 was used to create a barrier. WAKOL EM140 decoupling fleece was then adhered to surface with WAKOL MS260 to create the low tension sub floor. Subsequently, WAKOL Z715 leveling compound was poured on to the fleece to obtain the level needed for the installation of the parquet block. The machined parquet block was then installed using WAKOL MS260. This floor build up is not typical but is a good example of the diversity available through the Wakol systems. Once installed, the floor was finished with LOBA EasyPrime and LOBA 2K Fusion lacquer.
The end result was a replication of the original floor but in prime condition and with a low tension sub floor beneath. WAKOL and LOBA systems combined to provide the guarantee of performance
Are you interested in our products or in project management?
Please visit our store locator for the nearest dealer to purchase our products. If you would like to speak to one of our specialists for project management, maintenance advice or something else, please contact us. We are happy to help professionals like you move forward. No matter what
