Image Alt

PU Adhesives

  |  PU Adhesives


Wakol manufacture several parquet adhesives based on PU (polyurethane resin). These 2-component adhesives ensure impact-resistant bonding of both composite and solid wooden floors.

They are suitable for almost every application, are very strong and great value from a cost perspective. You can use this type of adhesive for all types of wooden floors on both cement and anhydrite-bonded subfloors that meet the DIN standards.

However, we do not recommend this adhesive on tile floors. Additionally, caution should be noted when using PU adhesives to install re-finished wooden floors. Any residue left on the wooden floor surface can be very difficult to remove and will likely need to be sanded. It is also wise to note that PU adhesive residue left on unprotected skin can be difficult to remove and can cause temporary staining. We therefore recommend using gloves with this type of adhesive. All Wakol PU adhesives are guaranteed with all Loba lacquers and oils in the Connected Systems program.


This flexible two-component PU adhesive with an open time of 50 minutes and a processing time of 30 to 40 minutes is one of our best-selling adhesives. The consumption is approximately 700 to 1500 gr / m2 depending on the exact application. It has an EC1 + rating and is suitable for underfloor heating.

Additionally it has high impact resistant adhesion and is suitable for almost any type of wooden or parquet floor.
It is available in 2 packaging sizes.

  • 6 kg packaging A-component and 0.75 kg B-component are nicely packed together in a bucket together with a pair of gloves, so that you leave nothing to chance.
  • 8.9 kg packaging A-component and 1.1 kg B-component.

This adhesive can be used directly on the surface of Wakol PU280 moisture barrier or Wakol D3055 universal adhesive primer.


If you need help and advice on something that is not covered, please contact us and we will try our best to answer your questions.